337
match with the OSPF type 1 external route.
Command Mode:
route-map mode
Usage Guide:
This command matches according to the type of OSPF routes
（
OSPF
AS-external LSA type is either type 1or type 2
）
. If the matching succeeded, then the
“permit” or “deny” action in the route-map is performed.
Example:
Switch#config terminal
Switch(config)#route-map r1 permit 5
Switch(config-route-map)#match route-type external type-1
13.2.3.10 match tag
Command: match tag <tag-val >
no match tag [<tag-val >]
Function:
Configure to matching with the tag domain of the OSPF routing message. The
“
no match tag [<tag-val >]
” deletes this configuration.
Parameter: <tag-val >
is the tag value, ranging between 0
～
4294967295.
Command Mode:
route-map mode
Usage Guide:
This command matches according to the tag value in the OSPF route. If
the matching succeeded, then the “permit” or “deny” action in the route-map is
performed.
Example:
Switch#config terminal
Switch(config)#route-map r1 permit 5
Switch(config-route-map)#match tag 60
13.2.3.11 route-map
Command: route-map <map_name> {deny | permit} <sequence_num>
no route-map <map_name> [{deny | permit} <sequence_num>]
Function:
Configure the route-map and entering the route-map mode. The “
no
route-map <map_name> [{deny | permit} <sequence_num>]
” command deletes
route-map.
Parameter: <map_name>
is the name of route-map,
permit
sets route-map matching
mode to permit mode,
deny
sets route-map matching mode to permit mode
（
set
sub will
not be executed under this mode
）
,
<sequence_num>
is the route-map sequence
number, ranging between 1
～
65535.
Default:
None
Command Mode:
Global Mode
Usage Guide:
A route-map may consist of several nodes each of which is a check unit.
