56
dir
Display the files and the sizes saved in the
flash
show history
Display the recent user input history
command
show memory
Display content in specified memory area
show running-config
Display the switch parameter configuration
validating at current operation state.
show startup
-
config
Display the switch parameter configuration
written in the Flash Memory at current
operation state, which is normally the
configuration file applied in next time the
switch starts up
show switchport interface
[ethernet <interface-list>]
Display the VLAN port mode and the
belonging VLAN number of the switch as well
as the Trunk port information
show tcp
Display the TCP connection status
established currently on the switch
show udp
Display the UDP connection status
established currently on the switch
show telnet login
Display the information of the Telnet client
which currently establishes a Telnet
connection with the switch
show telnet user
Display the information of all the Telnet clients
which are authorized to access the switch
through Telnet.
Show tech-support
Display the operation information and the
state of each task running on the switch. It is
used by the technicians to diagnose whether
the switch operates properly.
show version
Display the version of the switch
2.2.7.1 Commands for Show
2.2.7.1.1 show calendar
Command: show calendar
Function:
Display the system clock.
Command mode:
Admin Mode
Usage Guide:
The user can use this command to check system date and time so that