445
Transmit Delay is 5 sec, State Waiting, Priority 1
No designated router on this network
No backup designated router on this network
Timer intervals configured, Hello 35, Dead 35, Wait 35, Retransmit 5
Hello due in 00:00:16
Neighbor Count is 0, Adjacent neighbor count is 0
13.6.5.1.12 show ip ospf neighbor
Command: show ip ospf [<process-id>] neighbor [{<neighbor_id> |all |detail [all]
|interface<ifaddress>}]
Function:
Display the OSPF adjacent point messages
Parameter: <process-id>
is the process ID ranging between 0~65535
<neighbor_id>
is the dotted decimal notation neighbor ID
all: Display messages of all neighbors
detail: Display detailed messages of all neighbors
<ifaddress>
Interface IP address
Default:
Not displayed
Command Mode:
All modes
Usage Guide:
OSPF neighbor state can be checked by viewing the output of this
command
Example:
Switch#show ip ospf neighbor
OSPF process 0:
Neighbor ID Pri State Dead Time Address Interface
192.168.1.1 1 Full/Backup 00:00:32 6.1.1.1 Vlan1
192.168.1.3 1 Full/DR 00:00:36 20.1.1.3 Vlan2
192.168.1.3 1 Full/ - 00:00:30 20.1.1.3 VLINK2
Displayed information
Explanation
Neighbor ID
ID Neighbor ID
Priority Priority
State
Neighbor relation state
Dead time
Neighbor dead time
Address Interface
Address
Interface Interface
name
13.6.5.1.13 show ip ospf route
Command: show ip ospf [<process-id>] route
Function:
Display the OSPF routing table messages
