444
Command Mode:
All modes
Usage Guide:
According to the output messages of this command, we can view the
OSPF link state database messages
Example:
Switch#show ip ospf database
Router Link States (Area 0.0.0.2)
Link ID ADV Router Age Seq# CkSum Link count
192.168.1.2 192.168.1.2 254 0x80000031 0xec21 1
192.168.1.3 192.168.1.3 236 0x80000033 0x0521 2
Net Link States (Area 0.0.0.2)
Link ID ADV Router Age Seq# CkSum
20.1.1.2 192.168.1.2 254 0x8000002b 0xece4
Summary Link States (Area 0.0.0.2)
Link ID ADV Router Age Seq# CkSum Route
6.1.0.0 192.168.1.2 68 0x8000002b 0x5757 6.1.0.0/22
6.1.1.0 192.168.1.2 879 0x8000002a 0xf8bc 6.1.1.0/24
22.1.1.0 192.168.1.2 308 0x8000000c 0xc8f0 22.1.1.0/24
ASBR-Summary Link States (Area 0.0.0.2)
Link ID ADV Router Age Seq# CkSum
192.168.1.1 192.168.1.2 1702 0x8000002a 0x89c7
AS External Link States
Link ID ADV Router Age Seq# CkSum Route
2.2.2.0 192.168.1.1 1499 0x80000056 0x3a63 E2 2.2.2.0/24 [0x0]
2.2.3.0 192.168.1.1 1103 0x8000002b 0x0ec3 E2 2.2.3.0/24 [0x0]
13.6.5.1.11 show ip ospf interface
Command: show ip ospf interface
<interface>
Function:
Display the OSPF interface messages
Parameter: <interface> is the
name of interface
Default:
Not displayed
Command Mode:
All modes
Example:
Switch#show ip ospf interface
Loopback is up, line protocol is up
OSPF not enabled on this interface
Vlan1 is up, line protocol is up
Internet Address 10.10.10.50/24, Area 0.0.0.0
Router ID 10.10.11.50, Network Type BROADCAST, Cost: 10
