29
OSPF
Routing
Protocol
Type
router
ospf
command
under
Global
Mode.
Switch(Config-Router-Ospf)#
Configure
OSPF
protocol
parameters.
Use the
“
exit”
command to
return to
Global
Mode.
1.2.2.8 ACL Mode
ACL type
Entry
Prompt
Operates
Exit
Standard IP
ACL Mode
Type
access-list ip
command
under Global
Mode.
Switch(Config-Std-Nacl-
a)#
Configure
parameters
for
Standard
IP ACL
Mode
Use the “
exit”
command to
return to
Global Mode.
Extended IP
ACL Mode
Type
access-list ip
command
under Global
Mode.
Switch(Config-Ext-Nacl-
b)#
Configure
parameters
for
Extended
IP ACL
Mode
Use the “
exit”
command to
return to
Global Mode.
1.2.3 Configuration Syntax
ES3628EA Switch provides various configuration commands. Although all the
commands are different, they all abide by the syntax for ES3628EA Switch configuration
commands. The general commands format of ES3628EA Switch is shown below:
cmdtxt
<variable> { enum1 | … | enumN } [option]
Conventions:
cmdtxt
in bold font indicates a command keyword;
<variable>
indicates a
variable parameter;
{enum1 | … | enumN }
indicates a mandatory parameter that should
be selected from the parameter set
enum1~enumN
; and the square bracket ([ ]) in
[option]
indicate an optional parameter. There may be combinations of “< >“, “{ }” and
“[ ]” in the command line, such as
[<variable>]
,
{enum1 <variable>| enum2}
,
[option1
[option2]]
,
etc.
Here are examples for some actual configuration commands:
y
show calendar
, no parameters required. This is a command with only a keyword and
