464
route-map <word>
targets to the probe of the route map for introducing route
Command Mode: OSPFv3 protocol mode
Usage Guide:
Learn and introduce other routing protocol into OSPF area to generate
AS-external_LSAs
Example:
Switch#config terminal
Switch(config)#router ipv6 ospf
Switch(config-router)#redistribute bgp metric 12 metric-type 1
13.7.3.18 router-id
Command:router-id<router-id>
no router-id
Function:
Configure router ID for ospfv3 process. The “
no router-id
” restores ID to
0.0.0.0
Parameter: <router-id>>
is the router ID shown in IPv4 format
Default:
0.0.0.0 by default
Usage Guide:
If the router-id is 0.0.0.0, the ospfv3 process can not be normally enabled.
It is required to configure a router-id for ospfv3
Command Mode:
OSPFv3 protocol mode
Example:
Switch#config terminal
Switch(config)#router ipv6 ospf
Switch(config-router)#router-id 192.168.2.1
13.7.3.19 router ipv6 ospf
Command: [no] router ipv6 ospf [<tag>]
Function:
This command initializes the ospfv3 routing process and enters ospfv3 mode
for configuring the ospfv3 routing process. The “
[no] router ipv6 ospf [<tag>]
” command
stops relevant process
Parameter: <tag>
ospfv3 is the process mark which could be random strings made up of
characters and digits
Command Mode:
Global mode
Usage Guide:
To let he ospfv3 routing process work properly, this command must be
configured and ospfv3 must at least be enabled on one interface. When the tag
configured by the ipv6 router ospf area command under interface mode matches with the
tag of ospf process, the ospfv3 process is enabled on this interface.
Example:
Switch#config terminal
Switch(config)#router ipv6 ospf IPI
13.7.3.20 timers spf
