520
Default:
Not configured
Command Mode:
BGP mode and address-family mode.
Usage Guide:
Configure this attribute to avoid assigning the internal AS number to the
external AS sometimes. The internal AS number ranges between 64512-65535, which
the AS number could not be sent to the INTERNET since it is not a valid external AS
number. What removed here is private AS numbers of the totally private AS routes. Those
who have private AS numbers while also have public AS numbers are not processed.
Example:
Switch(config-router)#neighbor 10.1.1.64 remove-private-AS
13.8.3.64 neighbor route-map
Command: neighbor {<ip-address>|<TAG>} route-map <NAME> {<in|out>}
no neighbor {<ip-address>|<TAG>} route-map <NAME> {<in|out>}
Function:
Configure the route mapping policy when sending or receiving route. the “
no
neighbor {<ip-address>|<TAG>} route-map <NAME> {<in|out>}
” command cancels
this configuration
Parameter: <ip-address>
: Neighbor IP address
<TAG>
: Name of peer group
<NAME>
: Name of route mapping
<in|out>
: Direction of route mapping
Default:
Not set
Command Mode:
BGP mode and address-family mode.
Usage Guide:
First it has to configure route mapping under global mode by creating a
route map with route-map command and configure the match condition and actions, then
the command can be applied.
Example:
Switch(config)#route-map test permit 5
Switch(config-route-map)#match interface Vlan1
Switch(config-route-map)#set as-path prepend 65532
Switch(config-route-map)#exit
Switch(config)#router bgp 200
Switch(config-router)#neighbor 10.1.1.64 route-map test out
13.8.3.65 neighbor route-reflector-client
Command: neighbor {<ip-address>|<TAG>} route-reflector-client
no neighbor {<ip-address>|<TAG>} route-reflector-client
Function:
Configure the route reflector client. The “
no neighbor {<ip-address>|<TAG>}
route-reflector-client
” command cancels this configuration
Parameter: <ip-address>
: Neighbor IP address