523
{<ip-address>|<TAG>} soft-reconfiguration inbound
” command set to not perform the
inbound soft reconfiguration
Parameter: <ip-address>
: Neighbor IP address
<TAG>
: Name of peer group
Default:
Not perform inbound soft reconfiguration
Command Mode:
The system saves the inbound messages in the buffer after the soft
reconfiguration is set, will applies as soon as it restarts so to reduce consumptions of
switching with other routers. The command is only available when the route refresh
capability is not enabled
Example:
Switch(config-router)#neighbor 11.1.1.120 soft-reconfiguration inbound
13.8.3.70 neighbor soo
Command: [no] neighbor <ip-addr> soo <soo-val>
Function:
Configure the origin source from the neighbor route
Parameter:
The neighbor IP address show in dotted decimal notation
<soo-val>
is the origin source ,which the format is the same with RD
Command Mode:
vrf mode
Usage Guide:
If the user AS connects with several ISP devices, to avoid the user route
returns to itself through P area, this attribute can be set. Once this attribute is set, it
spreads with route. routes carrying SOO attributes will not be spreader to a neighbor
configured with the attribute
Example:
Switch(config)#ROUTER BGP 100
Switch(config-router)#address-family ipv4 vrf DC1
Switch(config-router-af)# neighbor 11.1.1.64 remote 200
Switch(config-router-af)# neighbor 11.1.1.64 soo 100:10
After this attribute set, the switch will no longer spreads the route with 100:10 rt attribute
to 11.1.1.64. (what have to be mentioned here is that the soo attribute will be judged
together with other rt attributes, which means if the rt is configured with the same
attribute, it will be regarded as the origin neighbor even if it’s not the real origin source.
As a matter of fact, the normal configured soo are a single configuration which is different
from rt/rd and unique within the accessible scope. In this way can only the origin concept
be exactly expressed)
13.8.3.71 neighbor strict-capability-match
Command:
neighbor {<ip-address>|<TAG>} strict-capability-match
no neighbor {<ip-address>|<TAG>} strict-capability-match
Function:
Configure whether strict capability match is required when establishing
