453
[no] IPv6 router ospf {area <area-id>
[instance-id <instance-id> | tag <tag>
[instance-id <instance-id>]] | tag
<tag> area <area-id> [instance-id
<instance-id>]}
Implement ospfv3 routing on the interface.
The
[no] IPv6 router ospf {area
<area-id> [instance-id <instance-id> |
tag <tag> [instance-id <instance-id>]] |
tag <tag> area <area-id> [instance-id
<instance-id>]}
command cancels
configuration.
2. Configure OSPFv3 parameters
（
1
）
Configure OSPFv3 package sending mechanism parameters
1
）
Set the OSPF interface to receive only
2
）
Configure the cost for sending packages from the interface
Commands Explanation
Interface Configuration Mode
IPv6 ospf cost <cost>
[instance-id <id>]
no IPv6 ospf cost [instance-id
<id>]
Appoint interface to implement required cost
of OSPFv3 protocol. The
no IPv6 ospf cost
[
instance-id
<id>
] restores the default setting
3
）
Configure OSPFv3 package sending timer parameter (timer of broadcast interface
sending HELLO package to poll, timer of neighboring layer3 switch invalid timeout, timer
of LSA transmission delay and timer of LSA retransmission.
Commands Explanation
Interface Configuration Mode
IPv6 ospf hello-interval <time>
[instance-id <id>]
no IPv6 ospf hello-interval
[instance-id <id>]
Sets interval for sending HELLO packages;
the “
no IPv6 ospf hello-interval [instance-id
<id>]
” command restores the default setting.
IPv6 ospf dead-interval <time>
[instance-id <id>]
no IPv6 ospf dead-interval
[instance-id <id>]
Sets the interval before regarding a neighbor
layer3 switch invalid; the “
no IPv6 ospf
dead-interval [instance-id <id>]
” command
restores the default setting.
IPv6 ospf transit-delay <time>
[instance-id <id>]
no IPv6 ospf transit-delay
[instance-id <id>]
Sets the delay time before sending link-state
broadcast; the “
no IPv6 ospf transit-delay
[instance-id <id>]
” command restores the
default setting.
