654
Ipv6 pim hello-interval < interval>
no ipv6 pim hello-interval
Configure interface PIM-SM hello message
interval time; the NO operation of this
command restores the default value.
2
）
Configure PIM-SM hello message holdtime
Command Explanation
Port Configuration Mode
Ipv6 pim hello-holdtime <value>
no ipv6 pim hello-holdtime
Configure the value of holdtime domain in
interface PIM-SM hello message; the NO
operation of this command restores the
default value.
3
）
Configure PIM-SM Neighbor Access-list
Command Explanation
Port Configuration Mode
(no)ipv6 pim neighbor-filter
<access-list-name>
Configure Neighbor Access-list. If a neighbor
is filtered by the list and a connection has
been set up with this neighbor, then this
connection will be cut off immediately; and if
no connection is set up yet, then this
connection can’t be created.
（
2
）
Configure PIM-SM Global Parameters
1
）
Configure switch to be candidate BSR
Command Explanation
Global Mode
Ipv6 pim bsr-candidate <ifname>
[hash-mask-length] [priority]
no ipv6 pim bsr-candidate
This command is the global candidate BSR
configuration command, which is used to
configure the information of PIM-SM
candidate BSR so that it can compete for
BSR router with other candidate BSRs. The
NO operation is to cancel the configuration of
BSR.
2
）
Configure switch to be candidate RP
Command Explanation
Global Mode
