ECP2010
/
ECP2010H
56 / 68
2/6) Parameters measured by the unit are displayed
–
time, volume, pressure. Let the unit to
stabilize for approximately 1 minute. Press
ENTER
to continue.
TIME --- ( --- ml); PRES xx (yy) MPa (xx
…a
ctual pressure, yy
…
pulsation)
3/6) Unit is prepared for start by pressing
ENTER
. At the same time start capturing mobile
phase in the volumetric flask.
4/6) Time and volume start countdown. After filling volumetric flask, press ENTER.
5/6) Pumping stops, time and volume countdown stops. Display shows
VCNT…
volume
measured by the unit during measuring (ml);
VREF…
reference volume (ml), filled in
according to used volumetric flask; (xx %)
…
deviation from previous calibration.
After pressing ENTER is calibration of flowrate (
FLOW AUTO)
finished. After pressing
ESC
it does not finish.
6/6) Unit calculates new deviation based on measured and submitted parameters and corrects
VCNT
compared to
VREF
and records new deviation.
