ECP2010
/
ECP2010H
19 / 68
4.7. Connections on Unit Rear Panel
Plug the power supply cord into the instrument socket on unit rear
panel. The cord is among unit accessories.
Plug the interconnecting cable between pump and
box
into
connector
ECB2000.
Cable is among
box
accessories.
Connector can be fixed by two screws using cross tip screwdriver.
Plug
injection valve
cable into
START
connector. Plug it all the
way in until it snaps in.
In order to unplug the connector, press the safety pin (see arrow
on right picture) and pull out.
Insert terminal block into connector
INTERFACE
, it is among the
pump accessories. If there is no signal connected to the terminal
block, it is not necessary to connect it.
Plug LAN network cable into connector
ETHERNET
, it is among
the pump accessories. Press the connector in until the safety pin
snaps in. In order to unplug the connector, press the safety pin
(see arrow on the right picture) and pull out.
The other end of network cable shall be plugged into PC or
computer network element.
Connector
USB
serves for plugging USB cable for interconnection
with PC.
Cable is not among the unit accessories.
