70 GEO3.5 MANUAL
SHAFT BARREL SYSTEM
The Eclipse GEO3.5 comes as standard with an Eclipse Shaft4 barrel.
1,4
The barrel screws into the body of the GEO3.5 using a right hand thread
meaning that if you hold the GEO3.5 pointing away from you the barrel screws
into the body in a counter-clockwise direction.
2
The barrel comprises of two parts, a barrel back
A
and a barrel front
B
The
two parts are joined together with a left hand thread meaning that if you hold
the barrel, with the back nearest you, the front unscrews in a counter-clockwise
direction. The bore size of the barrel back is engraved at the end of the barrel
back
C
.
3
On the barrel back there is a 016 NBR 70 o-ring
D
which prevents the barrel
from vibrating loose from the GEO3.5 body when the marker is fired. There is also
a 016 NBR 70 o-ring on the tip of the barrel back
E
helps with alignment when
the two sections are screwed together.
Replace and lubricate these o-rings with Eclipse Grease as necessary.
1 The bore size of your Shaft4 may vary according to the model of GEO3.5 you have.
2 The GEO3.5 will only accept Cocker threaded barrels.
Do not use any other type of barrel thread.
3 The Eclipse Shaft4 front and back barrel sections are not interchangeable with older version
Shaft front and back barrel sections (including Shaft3 barrel kits).
4 The model of barrel accompanying your GEO3.5 may differ from described.
D
A
B
E
C
Summary of Contents for GEO3.5
Page 1: ...ECLIPSE USER MANUAL ...