26 GEO3.5 MANUAL
THE ACTUAL RATE OF FIRE
When the actual ROF is selected for display the run screen
will look something like the screen to the right. The value
displayed in the top left of the screen represents the number
of full cycles completed in a second - the actual rate of fire
over that second.
The value below it is the maximum actual rate of fire that
has been achieved. The graph below this number shows
the actual rates of fire achieved over time where each bar
represents the amount of pulls in that second. To reset the
maximum, press and hold the button for 0.5 second.
TYPICAL BRANCH
TYPICAL
PARAMETER
TYPICAL PARAMETER
VALUE
TYPICAL RANGE BAR
TYPICAL PARAMETER UNIT
THE PEAK RATE OF FIRE
When the peak ROF is selected for display the run screen
will look something like the screen to the right, which differs
from the display of the actual ROF by the inclusion of the
indicator ‘PK’. The value displayed in the top left of the screen
represents the maximum rate of fire that has been recorded
over the last second. The value below it is the maximum peak
rate of fire that has been achieved.
The graph below this number shows the peak rates of fire
achieved over time. To reset this maximum, press and hold
the button for 0.5 seconds.
The peak ROF is typically higher than the actual ROF as it is
much easier to fire two shots in quick succession than it is to
maintain a string over a longer period of time.
THE MENU SYSTEM
Behind the run screen is a structured menu
system comprised of two layers of menus.
Each menu contains a number of menu items
and each menu item can either be a parameter
or a branch to another menu. Branches have
an animated graphic on the right of the display,
whereas parameters have their current value.
On parameter screens a range bar will be
displayed where there is a large scale of
adjust-ability in that parameter. The current
parameter value is displayed as a box on the
range bar which is used to indicate the range
of adjust-ability in the parameter value.
At the bottom of the parameter screen the unit
for that parameter will be displayed. Some
parameters will not have units, such as on or
off parameters.
Summary of Contents for GEO3.5
Page 1: ...ECLIPSE USER MANUAL ...