GEO3.5 MANUAL 11
WARNING!
Make sure the marker is turned off and that no paintballs are in the marker
or loader before installing a barrel.
Always fit a barrel-blocking device to the GEO3.5 when not in use.
WARNING
INSTALLING A BARREL
Every GEO3.5 comes complete with an Eclipse Shaft4 barrel (see page 70). The
bore size of the Shaft4 barrel back is engraved on the barrel back just in front of
the body threads.
To install the Shaft4 barrel, firstly screw the barrel tip and barrel back sections
together. The threads on the Shaft4 barrel tip are reverse threaded. To screw the
two sections together, with the barrel pointing away from you, turn the barrel tip in
a clockwise direction
(see figure 6A)
.
While pointing the GEO3.5 marker in a safe direction, insert the assembled Shaft4
barrel into the front of the GEO3.5 body and screw the Shaft4 barrel into the
GEO3.5 (in a counter-clockwise direction). Continue to screw the Shaft4 barrel
into the GEO3.5 body until the barrel becomes snug in the body
(see figure 6B)
.
DO NOT over tighten the barrel.
Install a barrel blocking device over the barrel such as the Eclipse barrel sock
1
supplied with the GEO3.5
(see figure 6C)
.
2
You have now installed the barrel.
1 The Eclipse barrel sock that comes with the GEO3.5 may differ from that pictured in this manual.
2 Instruction on using the Eclipse barrel sock can be found on the Eclipse barrel sock warning label.
FIG 6A
FIG 6B
FIG 6C
Summary of Contents for GEO3.5
Page 1: ...ECLIPSE USER MANUAL ...