30 DC motor driver module XN-322-1DCD-B35
XN300 slice modules
06/16 MN050002 EN
www.eaton.com
235
30 DC motor driver module XN-322-1DCD-B35
The XN-322-1DCD-B35 features a DC motor driver that can be used to run a
brushed motor, as well as two current outputs that can be used to drive two
external LEDs. These current outputs have rated operational currents of
20 mA and 350 mA.
The power control module can be used to run a DC motor with supply volt-
ages of 12 – 30 V and a maximum motor current of 3.5 A. It can also accom-
modate higher inrush currents briefly. The output power is controlled with a
PWM output, and the operating direction can be defined with the polarity of
the switched output driver stage. Accordingly, the output power must be
controlled using duty cycles.
In addition, these DC motor driver modules provide up-to-date operating data
on the motor so that the information can be used for further analysis or dis-
play if necessary.
•
Motor driver temperature
•
Current motor current
•
Motor status
•
Let-through energy
•
Diagnostics information
In order to integrate the motor into a speed control system, it is recom-
mended to provide a speed feedback signal by using a rotary encoder on the
motor together with an XN-322-1CNT-8DIO or XN-322-20-DI-PCNT module.
This will make it possible to determine the motor's speed, operating direc-
tion, and covered distance (angle of rotation).
The LED drivers can be programmed in such a way that the corresponding
LEDs will signal the information obtained by the module. For example, a
motor's speed or load can be represented by different LED brightness levels.
Summary of Contents for XN300
Page 4: ...II...
Page 14: ...10 XN300 slice modules 06 16 MN050002 EN www eaton com...