Eaton SVCH0203 SPX Advanced, Applications Manual

Page: 36 / 185

27
SPX Advanced application – parameter list
SPX ADVANCED APPLICATION MANUAL
SVCH0203—October 2017 www.eaton.com
Code Parameter Min Max Unit Default ID Note
P1.5.8.8 Reference limit supervision 0 2 0 350 0=Not used
1=Low limit
2=High limit
P1.5.8.9 Reference limit supervision
value
0.00 100.0 % 0.00 351
P1.5.8.10 FC temperature supervision 0 2 0 354 0=Not used
1=Low limit
2=High limit
P1.5.8.11 FC temperature supervised
value
–10 100 °C 40 355
P1.5.8.12 Analog supervision signal 0 4 0 356 0=Not used
1=AI1
2=AI2
3=AI3
4=AI4
P1.5.8.13 Analog supervision low limit 0.00 100.00 % 10.00 357 Reset limit
P1.5.8.14 Analog supervision high limit 0.00 100.00 % 90.00 358 Set limit
4.6 Limit settings
4.6.1 Current handling
Code Parameter Min Max Unit Default ID Note
P1.6.1.1 Current limit 0 2 x I
H
A I
L
107 Reaching the limit will lower output frequency
P1.6.1.2 Scaling of current limit 0 5 0 399 Scaling from 0 to ID107
0=Not used
1=AI1
2=AI2
3=AI3
4=AI4
5=FB Limit Scaling ID46
P1.6.1.3 Current Limit Kp 1 32000 1451
P1.6.1.4 Current Limit Ki 1 32000 1452
4.6.2 Power handling
Code Parameter Min Max Unit Default ID Note
P1.6.2.1 Power limit 0.0 300.0 % 300.0 1722 General power limit
P1.6.2.2 Generator power limit 0.0 300.0 % 300.0 1290
P1.6.2.3 Motoring power limit 0.0 300.0 % 300.0 1289
P1.6.2.4 Generator power limit 1 0.0 300.0 % 300.0 1513 Power limit activated by DI
P1.6.2.5 Generator power limit 2 0.0 300.0 % 300.0 1514 Power limit activated by DI
P1.6.2.6 Power limit 1 0 300.0 % 100.0 1503 Power limit activated by DI
P1.6.2.7 Power limit 2 0 300.0 % 50.0 1504 Power limit activated by DI
P1.6.2.8 Power limit ramp rate 0 10000 %/s 100 1502
P1.6.2.9 Power follower 0 1 0 1705 0 = No
1 = Yes
P1.6.2.10 Power follower hysteresis 0.0 100.0 % 10.0 1529
P1.6.2.11 Scaling motoring power limit 0 5 0 179 As parameter P1.6.2
Scaling from 0 to ID1289
P1.6.2.12 Scaling generator power limit 0 5 0 1088 As parameter P1.6.2
Scaling from 0 to ID1290
P1.6.2.13 Under voltage power DC level 0 1200 V 0 1611
P1.6.2.14 Under voltage power limit –300.0 300.0 % 0 1612