55
L I N X W I T H A T R A F L E X I N S T A L L A T I O N
Linx Belt Covers—In Ground
Version 3
Linx with Atra Flex Installation for Model 424 Automotive Dynamometers
6
Secure the six angle feet to the pit cover assemblies in the positions shown using
one 3/8-16 x 1/2-inch button-head flange bolt each.
7
Using the feet as a template, drill each hole needed to secure the feet to the floor.
8
Install the six Red Head anchors. Refer to
for installation
instructions.
9
Secure each foot to the floor using one 3/8-16 x 1-inch hex bolt and one 3/8-inch
washer.
10 Secure one access cover to each pit cover assembly using six 1/4-20 x 5/8-inch
torx screws each.
Figure 46: Install the Pit Cover Feet and Access Covers
access cover
