Dynex Agility Automated ELISA System, Operator'S Manual

Page: 87 / 155

Chapter 5 Maintenance and Troubleshooting
Agility System
Operator’s Manual
87
EQUIPMENT IN TRANSIT
IMPORTANT: Please include a copy of this form with each instrument. If your instrument contains a
hard drive please retain back-up copies of any stored files. Failure to do so may result in loss of those
files.
Return Authorization Number: ____________
Contact Technical Service, DYNEX Technologies
Phone: (800) 228-2354
Fax: (703) 631-7816
Equipment: ____________
Serial Number: _________
EQUIPMENT DECLARATION
Clearly indicate fault condition or reason for return.
CERTIFICATE OF DECONTAMINATION
I certify that the equipment described above has been disinfected/decontaminated*
and is clean, dry and fit for transport.
Signed: ____________________________________________
Title: ____________________________________________
Date: __________________
(DYNEX Technologies reserves the right to refuse improperly cleaned equipment)
Shipping address: DYNEX Technologies
Attn: (Above return number)
14340 Sullyfield Circle
Chantilly VA 20151-1683
* Suggested decontamination methods:
Readers - Wipe all surfaces with a cloth moistened with 10% bleach or 70% alcohol.
If using the bleach solution, follow with a mild detergent solution. Subjecting surfaces to prolonged
exposure to 10% bleach is not recommended.
Washers - Please follow the “Decontamination Procedure” found in the manual.
Figure 5-1: Equipment in Transit Form
When a component is being returned to the factory or a service depot, obtain a Return
Authorization Number (RA#) and package it is a manner that will preclude any damage due to
shipping.