Dynapro Technologies Dynapro ET TCS, Application Developer'S Manual

Page: 198 / 337

6-8
3266,%/((55256
If the host attempts to build a touchkey that overlaps an already existing touchkey, the previous
touchkey is cleared before the new one is built.
Omitting <Pw> and <Ph> or setting them both to 1 in this command constitutes a Clear
Touchkey command.
If this command changes a touchkey that is currently being pressed and a visual response is in
progress for the touchkey, the visual response is prematurely terminated.
If this command changes a touchkey that is currently being pressed and the touchkey is auto-
repeating, auto-repeating is terminated.
If this command changes a toggle touchkey that is toggled on, the touchkey is toggled off and the
visual state of the touchkey is set to off.
(;$03/(6
<ESC>[5;21;3u
Builds a touchkey 3 touch cells high by 1 touch cell wide at master cell 21.
<ESC>[5;6;10;4u
Builds a touchkey 10 touch cells high by 4 touch cells wide at master cell 6.
<ESC>[5;47u
Builds a l by l touchkey at master cell 47. This command effectively clears any larger
touchkey at master cell 47, since a 1 by 1 touchkey is the same as a single touch cell.
<ESC>[5u
Clears all touchkeys.