Dynapro Technologies Dynapro ET TCS, Application Developer'S Manual

Page: 137 / 337

5-50
'LVSOD\1RUPDO/LQH&RPPDQG'(&6:/5HPRWH
The Display Normal Line command displays the line occupied by the cursor (and only that line)
using normal characters.
To normalize a double-size line, the host must send the Display Normal Line command for both
of the lines that make up the double-size line; (the top and bottom halves must both be
normalized). In many cases, after both lines have been normalized, the host should send a
command to delete one of the lines, as one line usually contains exactly the same characters as
the other.
If the host normalizes a double-width or double-size line, the hidden normal-sized characters that
originally occupied the right-half of the line are restored. The cursor position remains in the same
character column position

the cursor follows the character it resides on across the screen when
the line is normalized.
23(5$72586$*(
None. (This is a remote command only.)
+26786$*(
<ESC>#5
Changes the line occupied by the cursor to appear normal sized.