Dynapro Technologies Dynapro ET TCS, Application Developer'S Manual

Page: 61 / 337

4-10
6(7836&5((1&200$1'6
The Setup Screen commands are used to control the user’s access to the Setup Screen, and to
save, recall, or reset Setup parameters remotely.
The Setup Screen commands are:
•
Setup Lockout Mode (Remote)
•
Save Setup (Local/Remote)
•
Recall Setup (Local/Remote)
•
Reset (Local/Remote)
Setup Screen commands cannot be used to set Setup Screen parameters individually. The
command to set an individual parameter is grouped with commands functionally related to that
parameter. For example, to set the Baud Rate parameter, see Communication Commands, later in
this chapter.
The Setup Screen commands are described in detail in the following pages. For ease of reference,
each command description begins on a new page.
NOTE
Where applicable, command names are followed by the appropriate mnemonic. Mnemonics in square
brackets [] are ANSI-specified commands. Mnemonics in braces {} are ANSI-compatible, TCS-private
commands. Mnemonics in parentheses () are ANSI-compatible, DEC-private commands.