Dynapro Technologies Dynapro ET TCS, Application Developer'S Manual

Page: 185 / 337

5-98
&XUVRU7\SH&RPPDQG>)&7@/RFDO5HPRWH
The Cursor Type command selects one of the following types of cursors:
•
Non-Blinking, Reverse-Video Block
The cursor appears as a reverse-video, full character cell block and does not blink.
•
Slow-Blinking, Reverse-Video Block
The cursor appears as a full character cell block and blinks every second with a 50% duty
cycle.
NOTE
A 50% duty cycle means that the cursor is "on" half of the time.
•
Fast-Blinking Reverse-Video Block
The cursor appears as a full-character cell block and blinks every 0.5 seconds with a 50%
duty cycle.
•
Non-Blinking Underline
The cursor appears as an underline and does not blink.
•
Slow-Blinking Underline
The cursor appears as an underline and blinks every second with a 50% duty cycle.
•
Fast-Blinking Underline
The cursor appears as an underline and blinks every 0.5 with a 50% duty cycle.
•
Invisible
The cursor is not visible.
'()$8/7
Slow-blinking reverse-video block.
23(5$72586$*(
The user selects the cursor type by entering the Setup Screen and, using touchkeys or the
optional keyboard, setting the Cursor Type parameter to the desired cursor type.
When the Cursor Type is changed by the user through the Setup Screen, the cursor itself is
displayed as the parameter’s value in the Parameter List Area of the Setup Screen. The displayed
cursor type changes immediately when the cursor type is changed.