Dynapro Technologies Dynapro ET TCS, Application Developer'S Manual

Page: 149 / 337

5-62
1HZ/LQH0RGH&RPPDQG>/10@/RFDO5HPRWH
The New Line Mode command determines which control characters are transmitted by the TCS
when the Return key or Enter key is pressed on an optional keyboard. The New Line Mode
command also determines the action taken by the TCS when it receives Line Feed <LF>, Form
Feed <FF>, and Vertical Tab <VT> characters.
The effect of the New Line Mode on the Return and Enter keys is shown in Table 5-7. The effect
of the New Line Mode on cursor movement is shown in Table 5-8.
'()$8/7
Off (reset).
23(5$72586$*(
The user sets or resets the New Line Mode by entering the Setup Screen and, using touchkeys or
the optional keyboard, setting the New Line parameter to one of the following values:
•
on (Sets New Line Mode)
•
off (Resets New Line Mode.)
+26786$*(
<ESC>[20l
Resets New Line Mode to "off." (The terminator for the reset command is the letter "l",
ASCII 6C hex.)
<ESC>[20h
Sets New Line Mode to "on."
7DEOH(IIHFWVRIWKH/LQH0RGHRQWKH5HWXUQDQG(QWHU.H\V
.(<%2$5' &+$5$&7(566(17727+(+267
,1387 1HZ/LQH0RGHRII 1HZ/LQH0RGHRQ
5HWXUQ 7&6 VHQGV&5! 7&6VHQGV&5!/)!
(QWHU
7&6VHQGV&5! 7&6VHQGV&5!/)!
:KHQWKHDX[LOLDU\NH\SDGLVLQWKH1XPHULF0RGH
7DEOH(IIHFWVRIWKH1HZ/LQH0RGHRQ&XUVRU0RYHPHQW
+267 &85625029(0(17
287387 1HZ/LQH0RGHRII 1HZ/LQH0RGHRQ
/)!))!RU
97!
0RYHVFXUVRUWRQH[WOLQHVDPH
FROXPQ
0RYHVFXUVRUWRQH[WOLQHOHIWPDUJLQ