Dynapro Technologies Dynapro ET TCS, Application Developer'S Manual

Page: 95 / 337

5-8
6&5((10(025<&200$1'6
Seven commands create, modify, delete, and indicate the status of screens stored in memory. All
screen commands are Remote; the host can issue them but the user normally cannot. Remote
commands can be issued by the user at the TCS only by first setting Local Mode. The screen
memory commands are:
•
Initialize Screen command (Remote)
•
Select Screen command (Remote)
•
Copy Screen command (Remote)
•
Delete Screen command (Remote)
•
Delete All Screens command (Remote)
•
Read Screen Memory Remaining command (Remote)
•
Read Screen Existence command (Remote)
These commands are described in detail in the following pages. For ease of reference, each
command description begins at the top of a new page.
NOTE
Where applicable, command names are followed by the appropriate mnemonic. Mnemonics in square
brackets [] are ANSI-specified commands. Mnemonics in braces {} are ANSI-compatible, TCS-private
commands. Mnemonics in parentheses () are ANSI-compatible, DEC- private commands.