Dynapro Technologies Dynapro ET TCS, Application Developer'S Manual

Page: 147 / 337

5-60
$XWR:UDS$URXQG0RGH&RPPDQG'(&$:0/RFDO5HPRWH
The Auto Wrap-Around Mode command sets and resets the Auto Wrap-Around Mode.
The Auto Wrap-Around Mode determines how the cursor responds when the TCS receives
characters that run off the right margin of the display.
•
When the Auto Wrap-Around Mode is "off" (reset), a character received when the cursor is
at the right margin replaces the previously displayed character and the cursor remains
stationary.
•
When the Auto Wrap-Around Mode is "on" (set), another character received (other than the
tab character <HT>) after a character had already been placed at the right margin is
displayed on the next line at the left margin. This causes the screen to scroll if the new line
would be below the bottom of the scrolling region. The tab character <HT> never moves the
cursor to the next line.
'()$8/7
Off (Reset).
23(5$72586$*(
The user sets the Auto Wrap-Around Mode by entering the Setup Screen and, using touchkeys or
the optional keyboard, setting the Auto-Wrap parameter to one of the following states:
•
off (reset)
•
on (set)
+26786$*(
<ESC>[?7l
Resets the Auto Wrap-Around Mode to "off." (The terminator for the reset command is the
letter "l", ASCII 6C hex.)
<ESC>[?7h
Sets the Auto Wrap-Around Mode to "on."