Dynapro Technologies Dynapro ET TCS, Application Developer'S Manual

Page: 277 / 337

B-1
$33(1',;%
&200$1'6800$5<7$%/(
,1752'8&7,21
This appendix contains a table that summarizes all TCS commands and provides commonly
needed information about each command. Commands listed here are fully documented in the
indicated chapters of this manual.
The Command Summary Table groups the commands according to related functions. Where
applicable, the command summary includes mnemonics, host usage, and TCS response.
Commands that are Local only have no Host Usage indicated. If the command elicits a TCS
response, the response is given below the command.
The commands are grouped according to the following functions and are presented in the order
in which they are covered in this manual:
•
TCS Mode commands
•
Setup Screen commands
•
Communication commands
•
Screen Memory commands
•
Character Set and Character Font commands
•
Character Displaying commands
•
Character Interpretation commands
•
Cursor commands
•
Screen Appearance commands
•
Touch Panel commands
•
Region commands
•
Keyboard commands
•
Status Reporting commands
•
Remote Self-Test commands
NOTE
Mnemonics in square brackets [] are ANSI-specified commands. Mnemonics in brace {} are ANSI-
compatible, TCS-private commands. Mnemonics in parentheses () are ANSI-compatible, DEC-private
commands. Optional parameters are represented in angle brackets (e.g.,
<Ps>).