Dynamic SFC332L, Operator'S Manual

Page: 68 / 148

Dynamic Flow Computers SFC332L Manual Data Entry
— 2-23
Date: 8/1/2019
S
W I T C H
O
U T P U T
A
S S I G N M E N T
User can assign an output to each of the Smart Flow Computer’s output switches from this list. The Smart
Flow Computer switch outputs are open collector type, requiring external D.C power.
Outputs in the top list,” Pulse Outputs”, require a definition of pulse output per unit volume. Therefore a
Pulse Output Width must be defined when one of these switch types are chosen. These outputs are
available through switches 1 or 2 only.
Outputs in the bottom list,” Contact Type Outputs”, are ON/OFF type outputs. They can be assigned to any
of the five switch outputs. (Switches 1 and 2 can be pulse or contact type output; switches 3, 4, 5 are
contact-type output only.)
Assignments – Pulse Outputs
Meter 1 Meter 2 Station
Gross
1 5 9
Net
2 6 10
Mass 3 7 11
Assignments – Contact Type Outputs
METER #:
1 2
Meter-Independent Parameters
Batch Ended (5 sec) 13 16 Day Ended (5 seconds) 19
Batch Preset Warn. 14 17 Dens. Period Low 46
Batch Preset 15 18 Dens. Period High 47
Meter Down 20 23 Temperature Out of Range 48
Flow Low 21 24 Gravity Out of Range 49
Flow High
22 25
Pressure Out of Range
50
Temperature Low 26 36 Active Alarms 51
Temperature High 27 37 Occurred Alarms 52
Pressure Low 28 38 Status Input #1 57
Pressure High
29 39
Run Switch
58
Density Low
30 40
Remote Control
59
Density High 31 41 Boolean Points* 170-199
Dens.Temp Low 32 42 Examples:
Dens.Temp High 33 43 50 = Pressure out of range
DP Low 34 44 10 = Net flow rate, station total
DP High
35 45 22 = Flow rate high, Meter #1
Direction – Forward
53 55
Direction – Reverse 54 56
Turbine Diagnose Failed 60 61
Note - Boolean Points Assignment 170 – Boolean Point 70 (version sfc.1.36, fc.1.30 and higher)
Boolean Points Assignment 171 – Boolean Point 71 etc.