Dynamic SFC332L, Operator'S Manual

Page: 136 / 148

Dynamic Flow Computers SFC332L Manual Modbus Data 4-42
Date: 8/1/2019
Audit Codes
1 DP Cut Off 52 Spare #1 Maintenance
2 DP High Switch Percentage 53 Spare #2 @4mA
3 Equilibrium Pressure Override 54 Spare #2 @20mA
4 Gravity Override 55 Spare #2 Maintenance
5 Alpha T Override 56 Analog Output Limit @4mA
6 Pipe ID 57 Analog Output Limit@20mA
7 Orifice ID 58 Density Correction Factor
8 API Override 59 GM/CC Conversion Factor
9 SG Override 60 Weight of H2O
10 Density Override 61 Atmospheric Pressure PSIA
11 Alpha T E-6 Override 62 Pulse Output #1 Volume
12 Ratio of Heat 63 Pulse Output #2 Volume
13 Viscosity 150 Common Temperature
14 Pipe Thermal 151 Common Pressure
15 Orifice Thermal 152 Station Type
16 Reference Temperature of Pipe 153 Flow rate Display
17 Reference Temperature of Orifice 154 Calculation Type
18 K Factor 155 Y Factor Select
19 Meter Factor 156 Tap Select 0=Flange,1=Pipe
20 Reverse Meter Factor 157 Use Stack DP 0=No, 1=Yes
21 Calibration Data 158 Densitometer Type
22 Calibration Data 159 Density Unit
23 Calibration Data 160 Use Meter Temp. as Dens. Temperature
24 Calibration Data 161 Day Start Hour
25 Calibration Data 162 Disable Alarms
26 Calibration Data 163 Batch Type
27 Calibration Data 164 Flow Resolution
28 Calibration Data 165 DP Low Assignment
30 DP Low @4mA 166 Temperature Assignment
31 DP Low @20mA 167 Pressure Assignment
32 DP Maintenance 168 Densitometer Assignment
33 DP High @4mA 169 Dens. Temperature Assignment
34 DP High @20mA 170 DP High Assignment
35 Temperature @4mA 171 Spare#1 Assignment
36 Temperature @20mA 172 Spare#2 Assignment
37 Temperature Maintenance 173 DP Low Fail Code
38 Pressure @4mA 174 Temperature Fail Code
39 Pressure @20mA 175 Pressure Fail Code
40 Pressure Maintenance 176 Densitometer Fail Code
41 Density/Gravity @4mA 177 Dens. Temp Fail Code
42 Density/Gravity @20mA 178 Spare#1 Fail Code
43 Density/Gravity Maintenance 179 Spare#2 Fail Code
44 Dens. Temperature @4mA
180 ***SEE NOTE (next page)
45 Dens. Temperature @20mA 181 Flow Cut Off Hertz
46 Dens. Temperature Maintenance 182 Densitometer Pressure Assignment
50 Spare #1 @4mA 184 Use Meter Press. As Dens. Pressure
51 Spare #1 @20mA 185 Densitometer Pressure Fail code