70 of 105
6.10
Password Setup
The GSC400 allows a 4 digit password
to be entered to protect the advanced
setup menu from any unauthorized
changes. This password will be needed
to perform any changes to the
advanced setup. If the password is
entered incorrectly, the controller will
allow 3 more tries before the GSC400
returns back to the main menu.
To set each digit of the password, do
the following:
•
Select Password No.1 (Digit 1)
Enter the desired number 0-9
•
Select Password No.2 (Digit 2)
Enter the desired number 0-9
•
Select Password No.3 (Digit 3)
Enter the desired number 0-9
•
Select Password No.4 (Digit 4)
Enter the desired number 0-9
Remember to write down the password
for future reference.
The default
password is all zeros.
You can only reset the password using
the GSC400 PC Interface. To reset the
passwords click on “Load Factory
Defaults” under File in the top menu.
This will reset ALL settings to their
factory default so make sure to record
the controller settings before doing this.
Summary of Contents for GSC400 Series
Page 15: ...Figure 4 General GSC400 System Wiring Diagram ...
Page 16: ...Figure 5 Digital IO Example ...
Page 105: ...105 of 105 ...
