DVTEL CT-5322F, User And Installation Manual

Page: 24 / 88

CT-5322F/CT-5642F User and Installation Guide
10
19. Insert the connectors and plugs into the connector panel.
Figure 15: Camera with Ferrites Installed for Power Supply
Note:
If you use a PoE+ switch, in order to ensure a proper earth ground between the camera
and the switch, we strongly recommend using Shielded Twisted Pair (STP) cabling.
Installations of ioi Thermal cameras with STP cabling and a properly earth grounded
PoE+ switch are tested to comply with industry immunity standards for electrostatic
discharge (ESD). Any other installation method may leave the camera at risk and void the
warranty.
20. Reconnect power to the cables.
21. Check for a steady LED indication on the Ethernet cable RJ45 connector to confirm connection to
the IP network. The status LED indicators are:

LED 1: Steady green for 10MB connection or flashing green for activity.

LED 2: Steady amber for 100MB connection or flashing amber for activity.
22. Insert the supplied white desiccant inside the back cover.
Figure 16: Back Cover and White Desiccant