DVTEL CT-5322F, User And Installation Manual

Page: 37 / 88

Using the Web Interface
23
7.2.1 Configuring Depth Settings
The Depth screen enables you define the perspective of the scene being monitored. It is used to set human
markers, ground guidelines, camera height, horizon, and advanced depth regions (such as hills, planes and
fences), which create a virtual 3D model for measurement of distances and sizes from the perspective of
the camera. The screen contains a wizard that facilitates configuring the depth settings.
Figure 26: Analytics > Depth Screen
There are two methods to configure depth settings:

If you are performing setup by yourself, click the Solo Setup tab.

If you are not performing setup alone, proceed to Step 1: Ground & Height .
Note:
It is possible to click the Verification tab to verify and apply settings at any time.
Solo Setup
The Solo Setup function enables you to install and setup the camera at a remote site without requiring
another person’s assistance. It is very useful and should be used even if you have another person’s
assistance. With this feature, you can:

Move around within the camera’s field of view.

Use the camera to record a set of snapshots of the scene while the user is moving around the
camera field of view. Creating the recording of the person in the FOV can be used to adjust
settings without requiring another physical walk through the FOV.

Use the recording of his movement to setup the depth by marking his height on the camera’s
field of view.
Follow the instructions in the Solo Setup tab to single-handedly setup the camera. Refer to the HTML Edition
Units User’s Guide for detailed instructions on configuring these settings.