DVTEL CT-5322F, User And Installation Manual

Page: 48 / 88

CT-5322F/CT-5642F User and Installation Guide
34
The following actions are available:
Activate relay output

In the Activate relay section, select one of the two options for when to activate the relay:

Immediately

After x seconds – Enter the number of seconds to wait enter in the text box.

Select the Activation signal:

Continuous : Select On or Off

Pulse activation: In the Pulse duration field, enter the duration of the pulse in
seconds. The range is from 1-65,535 seconds.
Clear alarms

Select when you want to clear alarms:

Immediately

After x seconds – Enter the number of seconds to wait enter in the text box.
Arm/Disarm camera

Select when you want the camera armed:

Immediately

After x seconds – Enter the number of seconds to wait enter in the text box.
Enable/Disable detection rule

In the Perform section, select when you want a detection rule enabled or disabled:

Immediately

After x seconds – Enter the number of seconds to wait enter in the text box.

The Rule name is according to the default.
3. If you want to add additional actions for this triggering event, click Add in the Actions tab. A new
action is added to the Action list.
4. Configure the new action as described in steps 2 and 3.
5.
To delete any of the actions for this triggering event, select the required action in the
Action list and
click Delete .
The selected action is deleted.
6. To change the order in which you want to perform the actions, use the Up and Down buttons.
7. Click Apply .