CT-5322F/CT-5642F User and Installation Guide
54
Date and Time Settings
The
Date and Time
screen is used to set the current date and time.
To configure date and time settings
1.
From the
Setup > Camera
screen, select
Date and Time
. The
Date and Time
screen opens.
Figure 62: Date and Time Screen
2.
To configure the date and time settings, enter the following information:
Field
Description
NTP Server
Enter the address for the NTP server.
NTP Interval
(Minute)
Enter the number of minutes between requests for the time service to
synchronize with the unit.
Enable NTP
Select
Yes
or
No
.
3.
Click
Save Changes
.
4.
To configure the current date, time and timezone settings, enter the following information:
Field
Description
Current Camera
Local Date and
Time
This field displays the current local date and time. Click
Refresh
to update
the date and time.
Select a New Date
and Time
Click the text box to enter the date and time to manually override the
NTP settings.
Select Time Zone
From the drop-down list, select the local time zone. Daylight Savings Time
is enabled automatically by default when you select your time zone. If
you are located in an area that does not observe Daylight Savings Time,
look for your region in the list.
5.
Click
Refresh Time
to update the current data and time settings.
6.
Click
Set Date, Time and Time Zone
to save the settings.
Note:
NTP must be disabled in order to save changes.
Summary of Contents for CT-5322F
Page 2: ......
Page 26: ...CT 5322F CT 5642F User and Installation Guide 12...
Page 28: ......
Page 72: ......
