DVTEL CT-5322F, User And Installation Manual

Page: 62 / 88

CT-5322F/CT-5642F User and Installation Guide
48
TCP/IP Settings
The ioi CT-5322F/CT-5642F Fixed Thermal Analytic IP camera uses the TCP/IP protocol to configure network
settings in order to communicate over an Internet Protocol (IP) network.
To configure TCP/IP settings
1. From the Setup > Network screen, select TCP/IP settings . The TCP/IP Settings screen opens.
Figure 56: TCP/IP Settings Screen
2. Configure the following settings:
Network Setting Description
Use DHCP
Select Yes if your network includes a DHCP server for dynamic allocation of
IP addresses.
Select
No to manually enter the IP address and enter the IP address for the
camera.
Static IP Address Enter the Static IP address for the camera.
Subnet Mask
If you selected No , enter the subnet mask for the IP camera. Use the same
value that is configured for the PCs on your network.
Gateway
If you selected No , enter the gateway for the IP camera. Use the same value
that is configured for the PCs on your network.
DNS Server
Enter the IP address of the DNS server that is used in your network. Use the
same value that is used for the PCs on your LAN.
Host Name
The default name is CT-5xxx-y-zF, where:

xxx is the model number by focal plane array size (320 or 640)

y is the frame rate in FPS

z is the lens FOV and camera type is F (fixed)
You can enter a friendly name for the camera.
3. Click Save Changes .