DVTEL CT-5322F User And Installation Manual Download

Page: 56 / 88

CT-5322F/CT-5642F User and Installation Guide

7.4.2

Restart Camera

The

Restart Camera

screen is used to reboot the camera.

Figure 47: Restart Camera Screen

To restart the camera

From the sidebar, click

Restart Camera

Confirm the action in the popup window.The camera reboots within 120 seconds.

Refresh the screen or press the F5 key for the login prompt.

7.4.3

Restore Factory Defaults

The

Restore Factory Defaults

screen is used restore partial factory default settings, restore all factory

default settings, and to restore analytics settings. From the sidebar, click

Restore Factory Defaults

Figure 48: Restore Factory Defaults Screen

To restore partial factory default settings

Click

Restore Partial Factory Defaults

. This restores the system and analytic settings.

Press the button again to confirm the action. The camera reboots to factory defaults, saving only
the TCP/IP settings entered by the user. See

TCP/IP Settings

(page 48).

Summary of Contents for CT-5322F

























































































Search results

Summary of Contents for CT-5322F

Reviews:

Related manuals for CT-5322F

Brands by name

Popular brands

DVTEL CT-5322F, User And Installation Manual

Search results

Summary of Contents for CT-5322F

Reviews:

Related manuals for CT-5322F

Brands by name

Popular brands