Sewing feet
Service manual H867 Version 00.0 - 08/2013
57
13.1 Setting an even sewing foot stroke
Correct setting
For sewing foot stroke 3, the presser foot and feeding foot are raised by
the same height.
Cover
• Arm cover
4.4.2 Removing and fitting the arm cover
Figure 44: Setting an even sewing foot stroke
Performing the setting steps
1. Set the handwheel to the 0° position.
2. Loosen the screw (3) for the sewing foot lever (4).
3. Lower the presser foot (1) and feeding foot (2) together down to the
throat plate.
Important:
Make sure that the feeding foot is only lowered down to the
throat plate. Do not inadvertently lower the feeding foot through the
throat plate cut-out down to the feed-dog.
4. Tighten the screw (3) for the sewing foot lever (4).
Risk of injury
Switch off the sewing machine before checking and setting the
sewing foot stroke.
WARNING
1
2
3
4
(1) - Presser foot
(2) - Feeding foot
(3) - Screw
(4) - Sewing foot lever
Summary of Contents for M-TYPE H867
Page 1: ...H867 Service manual...
Page 91: ......
