Working basis
10
Service manual H867 Version 00.0 - 08/2013
4.4 Removing the covers
In many types of setting work, you will have to remove the machine covers
first in order to access the components.
Described here is how to remove the individual covers and how to refit
them. Just the cover that needs to be removed is then specified in the text
for that particular type of setting work.
4.4.1 Access to the machine bottom section
In order to access the components at the machine bottom section, you
must first tilt the machine upper section backwards.
Figure 1: Tilt the machine upper section backwards and erect it again
Tilting the machine upper section backwards
1. Tilt the machine upper section backwards as far as it will go.
Erecting the machine upper section
1. Erect the machine upper section again.
Risk of injury
Crushing injuries from moving parts
Switch the sewing machine off before you remove the cov-
ers or refit them.
WARNING
Summary of Contents for M-TYPE H867
Page 1: ...H867 Service manual...
Page 91: ......
