Setting the potentiometer
Service manual H867 Version 00.0 - 08/2013
77
Figure 63: Setting the potentiometer
6. Check whether the lifting gear plates are flush.
If the plates are not flush:
7.Loosen the connecting clamp setscrews (1).
8.Set the connecting clamp (2) for the lifting cylinder such that the plates
are flush.
9.Tighten the connecting clamp setscrews (1).
10.Loosen the setscrew (3) for the shaft.
11.Turn the potentiometer axle such that the left display shows
1
in the first
instance and the relevant maximum speed next to it.
12.Tighten the setscrew (3) without changing the value shown in the dis-
play.
13.Press the ESC key two times.
Important
:
14.Switch off the machine at the main power switch.
15.Switch on the machine at the main power switch.
Switching off and on will save the setting.
3
4
1
2
(1) - Connecting clamp setscrews
(2) - Connecting clamp for lifting cylinder
(3) - Setscrew for the setting shaft
(4) - Potentiometer
Summary of Contents for M-TYPE H867
Page 1: ...H867 Service manual...
Page 91: ......
