69
Basic Operations
3
Press the F key to display the
Select menu
screen.
Use the CURSOR (Up/Down) key to select
Adjust All
and press
the SET key.
Adjust All
(in a vertical direction)
This corrects a document position in a vertical direction against the JOB set.
Adjust All
(in a horizontal direction)
Adjust All (in Vertical/Horizontal Direction)
This corrects a document position in a horizontal direction against the JOB set.
REFERENCE
You can program
Adjust All
/
for a JOB. The saved settings are automatically set when
the JOB is retrieved. Settings that are temporarily changed and not saved are active until the
power is turned
OFF
or another JOB is retrieved.
Adjust All
(in a horizontal direction)
This function corrects a document position in a horizontal
direction against the JOB set (mm).
1. Use the CURSOR (Up/Down) key to select moving direction
(+/
−
)
2. Use the NUMERIC keys to enter a value and then press the
CURSOR (Down) key.
When both
**.*mm or more
under
Read REG mark
and
Adjust
All
are set, the values are summed up.
REFERENCE
Adjust All
(in a vertical direction)
This function corrects a document position in a vertical direction
against the JOB set (mm).
1. Use the CURSOR (Up/Down) key to select moving direction
(+/
−
).
2. Use the NUMERIC keys to enter a value and then press the
CURSOR (Down) key.
When both
**.*mm or more
under
Read REG mark
and
Adjust
All
are set, the values are summed up.
REFERENCE
Adjust All
+ 0.0
+ 0.0
(mm)
Settings2
Settings3
Adjust All
Select menu
Adjust All
+ 0.0
(mm)
+ 0.0
