129
2
PC Controller Setting
4
Programming a JOB for DC-646 V
ia Computer (PC Controller)
2. Enter the document length before printing in the
Original document length
box.
Enter the document length after printing in the
Actual
document length
box.
3. Click
OK
.
Clicking
BACK
cancels the entered value.
SETTING 3
Click the
SETTING 3
tab.
REFERENCE
Adjust Fold Position
appears when any folder machine
is set to
enable
on the
OPTION MODULE
tab of
MAINTENANCE
.
The
MAINTENANCE
setting screen is locked with the
password.
To change the
MAINTENANCE
setting, please o
ff
er it to
our service person.
(Refer to the Instruction Manual of each folding
machine.)
Apply Shrinkage
In case printed documents are shrunk by heat generated
on digital printer, by entering the original document
size and document size after shrunk, the DC-646
automatically calculates the shrinkage ratio and adjusts
the cutting and creasing position accordingly.
1. Select the
Apply Shrinkage
check box to enable this
function.
Then click
Adjust
.
RTM o
ff
pos Adj (RTM (Rotary Tool Module) o
ff
position Adjustment)
(only when the
RTM (rotary tool module (option))
is
installed.)
This adjusts processing end position of the tool of the
RTM (rotary tool module
(option)).
Refer to the RTM (Rotary Tool Module) Instruction
Manual.
RTM on pos Adj (RTM (Rotary Tool Module) on
position Adjustment)
(only when the
RTM (rotary tool module (option))
is
installed)
This adjusts processing start position of the tool of the
RTM (rotary tool module (option))
.
Refer to the RTM (Rotary Tool Module) Instruction
Manual.
