2
Part Names and Their Functions
Appearance
No.
Name
Function
1
Back guide (for feed tray) Set this according to the document size.
2
Side guide (for feed tray) Set this according to the document size.
3
PC arm mount
Install a commercial monitor arm for putting the laptop computer.
(Model: 115V (USA), 230V (UK))
4
Feed tray
Original document is placed here.
5
Level adjustment knob Adjusts the elevator height.
6
Air
fl
ow adjustment knob Adjusts the air
fl
ow level.
7
Separator adjustment knob Adjusts the distance between the separator and the conveyance belt.
8
Top cover 1
Open this to move the
upper guide
or to remove a document
jam from the document feed area. When the cover is
open
,
the
machine stops running
with
the interlock switch.
9
Control panel
Displays operations and status.
10
Emergency stop
switch
Press this to stop the machine in an emergency. Turning the
switch to the right releases the emergency stop.
11
Top cover 2
Open this to remove a document jam from the slitter/optional module
area or to replace the optional module.
When the cover is
open
,
the
machine stops running
with
the
interlock switch.
12
Top cover 3
Open this to remove a document jam from the cutter/crease/
optional module or to replace the optional module. When the
cover is
open
,
the
machine
stops
running
with
the interlock
switch.
13
Scale
Measures the cut and slit position, and the
fi
nished product.
14
Front cover
Open this to remove the waste box. When the cover is
open
,
the
machine stops running
with
the interlock switch.
15
Waste box
Receives pieces of waste paper.
16
Reject tray
This is where the document comes when it is rejected due to a
double feed, barcode error, REG mark error, etc.
17
USB terminal
Used for the connection to your computer on the PC Controller
that you are using.
18
Skew adjustment knob Adjusts the document skew.
19
Power switch
Move this up/down to turn the power ON/OFF.
2
1
3
4
5
6
7
8
9
10 11
13
12
14
15
17
18
19
16
21
22
20
