208
Daily Maintenance
Daily Maintenance
●
In the case of slitter 5 and slitter 6
1. Loosen the two hexagon socket head cap screws
securing the lid of the slitter with the intersecting
tools. (The
fi
gure on the right shows the slitter 5.)
You can lay the
slitter module
on its side if it is
easier for you to carry out the work.
REFERENCE
Upper tool
Lower tool
Lid
Lid
Lower tool
Lower tool
Upper tool
Hole of the lid
Push this part.
2. Insert the jig into the hole of the lid while sliding
the lid downward.
3. Push the jig in the direction of the arrow to correct
the intersecting lower tool.
The
fi
gure on the right shows that the upper tool
and the lower tool intersect.
Push the indicated part in the
fi
gure on the right
with the jig.
REFERENCE
4. Pull out the jig while pushing the lid upward.
Make sure that the tool intersection is corrected.
The
fi
gure on the right shows that the tool
intersection is corrected and the tools are in the
normal position.
REFERENCE
Jig
Jig
1
2
Pushing the jig in without sliding the lit may
damage the upper tool and the lower tool.
REFERENCE
