14
Preparation Before Use
Slide the
guide
to the point at which the
fi
nished
product is ejected during the time.
Adjust each
guide
to appropriate position so that
the card edge on the non-operator’s side comes
into contact with the
guide
.
The cards tidily drop o
ff
with leaning.
●
It improves document alignment by slightly
shifting the
guide
to the position as shown in
the
fi
gure when the document alignment is
poor.
●
It improves document alignment by setting the
guide
to the position as shown in the
fi
gure
when the document is processed with
gutter
slits
and the
fi
nished products are long.
Set the
guide assy
(for the
card
stacker
) by
adjusting the position to the
fi
nished product
length so that it is positioned vertically to the
ground.
REFERENCE
The
fi
gure on the right shows front view of (A) in
step 4.
REFERENCE
(A)
(A)
Adjust the distance (A)
which is between
the
guide
to the
guide assy
according to the
document length.
REFERENCE
The
fi
nished products temporarily stop for about
one minute when they reach the document-exit
point.
Guide assy
Adjust the guide to the card edge.
Operator’s side
Operator’s side
Operator’s side
Non-operator’s side
Non-operator’s side
Non-operator’s side
Slightly shift the guide position.
Set the guide between each card.
