100
PC Controller Setting
Reg. Mark
Reading the REG mark and correcting the print position gap improve accuracy of document
processing.
Slitter Guide
When the
slitter module
is not used, it acts as a document guide to stabilize the document
conveyance.
Recommended for light weight documents.
Cut Trim Setting
The lead margin, the trail margin, and any gutters shorter than 49 mm are chopped up and
dropped into the waste box.
Crease Depth
This sets the depth of a crease when a document is creased.
Side Blow Fan (Option: ASIA, TAIWAN)
Air is blown out to loosen documents, preventing a double feed.
Speed
This sets the processing speed.
Auto Trail Cut
This sets the trail margin cut of a document.
REG. Mark Spec
This sets a reading function for a bold REG mark printed on a specially treated document.
(
→
P.23 IMPORTANT)
