57
Basic Operations
3
Function Setting
< Function Setting 1 >
Air knife
Compressed air is blown out from the front of documents to loosen them, preventing a double
feed.
Default is
ON
.
Side blow fan (Option: ASIA, TAIWAN)
Air is blown out from the side of documents to loosen them, preventing a double feed.
Default is
OFF
.
Fan reg (Fan register)
This suctions the document to the
conveyance belt
for skew correction.
Default is
MAX
.
Read REG mark
This sets an operation mode when a REG mark is detected. Sensing the REG mark and handling
operations at the regular position improve accuracy of documents handling.
Default is
ALL
.
Read REG (REG mark reading accuracy)
This sets REG mark reading accuracy. Default is
Normal
.
REG mark spec
This sets a reading function for a bold REG mark printed on a specially treated document.
(
→
P.23 IMPORTANT)
Slitter guide
When no slitters are in use for performing a JOB, these slitters act as document guides to
stabilize the document conveyance.
Default is
OFF
.
Cut trim mode
The lead margin, the trail margin, and any gutter cuts (48.9 mm or shorter) are chopped up and
dropped into the waste box. If there is no lead margin or trail margin on the document, select
No
bleed mode
.
Crease depth
This sets the depth of a crease when a document is creased.
Speed
This is used to select processing speed from
FAST
or
SLOW
.
Auto trail cut
This performs a dummy cut for the trail margin of a document and helps the trail margin drops
into the waste box smoothly.
Saved settings for each function except for
Read REG (REG mark reading accuracy)
are
automatically set when a JOB is retrieved.
Settings that are changed after the JOB is retrieved is active until the power is turned
OFF
or
another JOB is retrieved.
The settings for
Read REG (REG mark reading accuracy)
is active after the power is turned
OFF
as well.
REFERENCE
