Duplo DC-646, Instruction Manual

Page: 184 / 244

164
When Messages Appear When Messages Appear
Message Status and Solution
Status: The right (or left) tool of the margin slitter is locked.
* shows R (right) or L (left).
Solution: Remove the document from the margin slitter area and then
press the STOP key.
( → P.177 J5 MSM/SLOT2)
Status: The right (or left) tool of the module in the slot (2–4) is locked.
# shows a slot number.
* shows R (right) or L (left).
Solution: Remove the document from the slot (2–4) and then press the
STOP key.
( → P.177 J5 MSM/SLOT2, → P.180 J6 SLOT3/4)
Status: The cutter is locked.
Solution: Remove the document from the cutter area and then press
the STOP key.
( → P.182 J7 CUT, CREASE)
Status: The creaser is locked.
Solution: Remove the document from the creaser area and then press
the STOP key.
( → P.182 J7 CUT, CREASE)
Status: The gutter de fl ector (1, 2) is locked.
# shows a de fl ector number.
Solution: Remove the document from the gutter de fl ector area and
then press the STOP key.
( → P.182 J7 CUT, CREASE)
Status: The upper tool of the module in the slot (2–4) is locked.
# shows a slot number.
Solution: Remove the document from the slot (2–4) and then press the
STOP key.
( → P.177 J5 MSM/SLOT2, → P.180 J6 SLOT3/4)
Status: The CPM (cross perforation module) is locked.
Solution: Remove the document from slot 2 and then press the STOP
key.
( → P.177 J5 MSM/SLOT2)
Check document
in SLOT
to clear
Check document
in cutter area
to clear
Check document
in gutter area
to clear
Check document
in SLOT
to clear
Check document
in SLOT2
to clear
MSM-* LOCK
SLOT#-* LOCK
CUTTER LOCK
GUTTER# LOCK
SLOT# UPPER LOCK
CPM SLIDE LOCK
Check document
in MSM
to clear
Check document
in creaser area
to clear
CREASER LOCK