62
Function Setting
Crease depth
Set
Crease depth
function when creasing on the document.
Use the CURSOR (Right/Left) key to select
MAX
,
MID
, or
MIN
and press the CURSOR (Down) key.
• Set this to
MAX
for heavy weight documents and
MIN
for light
weight documents.
• The above screen appears only when a value is entered to
Crease
. (
→
P.40 Crease))
REFERENCE
Crease depth
Settings1
MAX MID MIN
*/**
Speed
Use the CURSOR (Right/Left) key to select
FAST
or
SLOW
and
press the CURSOR (Down) key.
Speed
FAST SLOW
Settings1
*/**
Auto trail cut
Use the CURSOR (Right/Left) key to select
ON
or
OFF
and press
the CURSOR (Down) key.
ON
:
Processes an optimum trail margin cut for a JOB.
Set this
to
ON
when the trail margin does not drop easily.
Default
is
OFF
.
OFF
: Does not perform the
auto trail cut
regardless of the
length of the trail margin.
Auto trail cut
Settings1
*/**
ON OFF
REFERENCE
•
Dummy cut
: The machine performs cutting
operation three times without a
document to be cut at the position
where a document is fed for the
distance of trail margin plus extra
length. This is e
ff
ective for dropping
a document, such as when the trail
margin is jammed between the roller
and the lower tool of the cutter.
•
Trail margin
: Means a margin of the trail edge of
a document produced when the last
cut is performed.
Last cut
Document feed direction
T
rail margin
Press the SET key.
IMPORTANT
●
If you exit
Function
Setting
without pressing the SET key, the function set are
not saved.
●
If you press the SET key before completing
Function Setting
, the setting you
have just entered is saved and the standby screen appears.
If
fi
nishing accuracy cannot be obtained because of roller slip
due to slippery documents (UV coated documents, etc.),
select
SLOW
.
