Duplo DC-646, Instruction Manual

Page: 123 / 244

103
2
PC Controller Setting
4
Programming a JOB for DC-646 V
ia Computer (PC Controller)
REFERENCE
● Standard Size
Click Standard Size and select from the Paper Size box.
Then click NEXT .
You can set Custom Size in the following range.
Width: 210 to 370 mm
Length: 210 to 999.9 mm
Paper Size
● Custom Size
Select Custom Size when using documents of other
size than the standard size.
Enter a value of document width and length and click
NEXT .
REG. Mark
Click REG. Mark enable to use the REG mark reading
function.
Enter the distance from the right edge of the document
to the side mark in the
Side Mark box, then click NEXT .
Enter the distance from the lead edge of the document
to the lead mark in the
Lead Mark box, then click NEXT .
When not using this function, click REG. Mark disable ,
then click NEXT .
Enter a JOB name in the JOB Name box and click
NEXT .
You can enter up to 30 characters.
Usable characters;
• Alphabetical letters (A to Z, a to z)
• Numeric characters
• Symbols
REFERENCE
Finished size
Enter a value of the fi nished document width in the
Width box and click NEXT .
Then enter a value of the fi nished document length in
the Length box and click NEXT .