Programming a JOB on the Control Panel
33
Programming a JOB on the Control Panel
2
Slitter guide
When no slitters are in use, these slitters act as document guides to stabilize the document
conveyance. Recommended for light weight documents.
Speed
Select the processing speed.
Selecting
SLOW
improves
fi
nishing accuracy.
Crease depth
This sets the depth of a crease when a document is creased.
Usually set this to
MID
.
Set this to
MAX
for heavy weight documents and
MIN
for light weight documents.
Auto trail cut
This performs dummy cuts for dropping the trail margin cut easily.
Air knife
Compressed air is blown out from the front of documents to loosen them, preventing a double
feed.
Side blow fan (Option: ASIA, TAIWAN)
Air is blown out from the side of documents to loosen them, preventing a double feed.
Fan reg
(Fan register)
Document skewing in the feeding area is corrected.
Tool position of cross tool module (When CPM (cross tool module) is used)
Enter the distance between the right edge of the document and perforation start/end positions.
Tool position of rotary tool module (When RTM (rotary tool module) is used)
Enter the distance between the lead edge of the document and perforation start/end positions.
